Piston rods tubes

PISTON RODS TUBES
Brochure

Standards	- EN 10305-1 - EN 10305-4
Used for	- Manufacturing of Piston rods for hydraulic cylinders. - The tubes are suitabe for chroming. Note: The tubes are cold drawn having OD machined by center-less grinding to final piston rod size plus an agreed small over metal suitable for last grinding operation before chroming.

Final surface finish, Ra:	0.40 µm or better.
Straightness	max 0.35 mm/1000mm.
Chemical composition (%)
Mechanical properties
Impact test
Non-destructive testing
Tube ends preparation	Protected with plastic caps.
Surface protection	Unprotected for last grinding operation before chroming.
Marking	Continuous marking along the length of the tube with following information: manufacturer’s logo, dimension (OD x ID), steel grade, heat number and the number of standard or other data as per the customers’ request.
Packaging	Packed in bundles with circular or hexagonal cross-section, bundle weight of maximum 2000 kilograms. The bundles are tied with protected metallic straps to provide protection against mechanical damage and corrosion during storage and in transit.
Mill test report	Mill test reports are issued to customer requirements. Usually it comply with EN 10204 – 3.1